Conveyor Belts
Gran variedad de cintas transportadoras industriales para satisfacer cualquier sector, desde las cintas ligeras con aplicaciones diversas (por ejemplo, en almazaras de aceitunas) a cintas pesadas de gran envergadura utilizadas en canteras para grandes producciones de materiales pesados, pasando por cintas de chapa plegada, dosificadores de banda, transporte de paquetería, cintas para raspón de uva y cintas para aplicaciones especiales, en función de las necesidades de cada cliente.
Treico’s Standard Tube Conveyor
Heavy-duty conveyor (for arids and recycled products)
Sheet conveyor (for agri-food products and waste management)
Cinta estandar Treico tubular
The conveyor belt support system is composed of a lattice structure made up of four 1″ tube beams, braced by 3/4″ tubes, forming a box beam with a 400 mm cant.
The roller system includes lightweight roller stations with a diameter of Ø60 mm and a shaft of Ø12 mm, arranged in “V” or “Trough” configurations.
The drive unit consists of a cage or cylindrical drum made of sheet metal covered with grooved rubber, depending on the type of drive required. This drum features taper to ensure the self-centering of the belt. The transmission system is carried out by means of a pendulum reducer set on the drum shaft, accompanied by V-belts and a three-phase electric motor.
Type of material to be transported:
Table 1: Relationship of bandwidth to belt inclination, V-shaped and trough arrangement, with density factor 1
Image 1: CTL V-section.
Table 2: Relationship of measurements of a CTL in V, with density factor 1.
Imagen 2: Sección de CTL en artesa.
Tabla 3: Relación de medidas de una CTL en artesa, con factor de densidad 1.
